Triple Layer Co-Extrusion & Dry Cure Cable She

Triple Layer Co-Extrusion & Dry Cure Cable She

Victor Chen
Contact person

Basic Information

APPLICATION: This production line is designed for producing 6 35KV cross-linking PE insulated cables The cables are produced by the dry cross-linking method. The nitrogen gas is used for cross-linking and cooling by cold water. . Main technical specifications: 1.Voltage grade: Cross-linking PE: 6 35KV 2.Product size: Copper core: 35 630mm 2 Aluminum core: 50 800mm 2 3.Max weight of the cable: 10Kg /M 4.Max. dia. of the cable: 70mm 5.Cable structure: Thickness of the conductor shield: 0.5 2mm Insulation thickness: 3.4 10.5mm Thickness of the insulation shield: 0.5 2mm 6.Material: Conductor: compacting copper and aluminum stranded wires Conductor shielding: Cross-linking conductor shield coating material Insulation: Cross-linked PE Insulation shield: Strippable insulation shield coating (below 35KV) Non-strippable insulation shield coating (35KV) 7.Designed speed: 0 30m /min. 8.Pipe lay-out mode: Semi-catenary type Slope angle of the cooling zone: 1 o 2 o Coefficient of the catenary: 200 150 Length of the cross-linking zone: Approx. 41 M Material: 1Cr18Ni9Ti, 219 × 4 , drawn seamless pipe Max. designed temperature: 450 o C Length of the pre-cooling zone: Approx 13M Material: 1Cr18Ni9Ti, 219 × 4, drawn seamless pipe Length of the cooling zone: Approx 57 M Material: 1Cr18Ni9Ti, 150 × 4, drawn seamless pipe Designed pressure: 1.6MPa 9.Arrangement of the plastic extruders: 65-150-90 for triple layer plastic co-extrusion 65extruder for inner wire core shielding, 150 extruder for cross-linking PE, 90 extruder for insulation shielding 10.Consumption of the public utilities: Electricity: Total power consumption: 750KVA 380 V ± 10% , 60Hz ± 10%, 3-phase & 5 -wire Water: pressure: 0.2 0.6MPa. Consumption: 15m 3 /h (circulating water from the water reservoir) Compressed air: pressure: 0.4 0. 6 Mpa, Consumption: 0.5m 3 in a moment (standard status) Nitrogen gas: pressure: 2.0 2.5MPa, Purity: 99.5%, Consumption: 4 8m 3 /h (standard status) In order to satisfy the machine starting requirement, a nitrogen gas storage tank with a capacity of no less than 5m 3 should be made available . ( Storage tank is the buyer's supply) 11.The height of the building: The first floor :+ 0000mm The second floor:+ 5400mm The third floor:+ 10200mm

Delivery terms and packaging

Port: SHANGHAI
Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1

    Дата события:

    12.10.2016 - 18.10.2016
    Catalog
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product